Emergency Service Available! Call us: (629) 245-4040

Oven Not Heating

If your oven turns on but does not heat properly, cooking becomes difficult and food may take much longer to prepare. Ovens rely on heating elements or gas igniters to generate the heat required for baking and roasting. When these components fail, the oven may stay cold or take an unusually long time to reach the set temperature.

Common Symptoms

  • • Oven does not heat at all
  • • Oven takes a very long time to preheat
  • • Food cooks unevenly or too slowly
  • • Oven temperature never reaches the set level
  • • Oven turns on but produces little or no heat
  • • Gas oven heats on some days, then stops partway through cooking

From a Real Repair

An Electrolux gas oven standing open in a kitchen, the cover over the bottom burner lifted during the repair
An Electrolux gas oven in Bellevue, Nashville. Some evenings it cooked dinner; on others it warmed up and quietly gave up halfway through.
The gas burner tube of the same oven with the igniter mounted on it
The igniter on the bake burner. Worn, it still lit the gas on some attempts and fell short on others, which is why the fault came and went. It was replaced with an original Electrolux part, and the oven heats normally again.

Recent Oven Repair Jobs

Real appliance repair work completed in Franklin and nearby areas.

Portfolio
← Swipe to see more →

Common Causes

• Failed bake heating element
• Weak or worn gas igniter
• Faulty temperature sensor
• Defective oven control board
• Loose or damaged wiring connections
• Thermal fuse or safety thermostat failure

Most oven heating problems are related to the components that generate or regulate heat. In electric ovens the bake element is responsible for producing most of the heat during cooking. In gas ovens the igniter must glow hot enough to open the gas valve. If these components weaken or fail, the oven may not heat properly or may take much longer to reach the desired temperature.

Why an Oven May Stop Heating

Electric ovens rely on heating elements to produce heat. If the bake element burns out or develops a break in the coil, the oven will no longer generate sufficient heat for cooking.

Gas ovens depend on an igniter to light the burner. Over time igniters weaken and may glow without becoming hot enough to open the gas valve. When this happens the oven may take a long time to heat or may not heat at all.

Temperature sensors and electronic control boards also play a role in regulating heat. If these components fail, the oven may receive incorrect temperature readings or may not activate the heating system properly.

What to Check First - and What Not To

  1. 1

    On an electric oven, set it to bake and look at the bottom element after a minute.

    It should glow orange along its whole length. A dark section, or no glow at all, means the bake element has failed - one of the cheaper repairs on an oven.

  2. 2

    Try the broil element instead.

    If broil heats and bake does not, the oven has power and a working control board: the fault is the bake element itself, not the electronics.

  3. 3

    On a gas oven, listen after you set a temperature.

    You should hear the igniter tick and then the burner catch within a minute. A glowing igniter that never lights the gas is a weak igniter, the most common gas oven failure and a standard replacement.

  4. 4

    Check whether the clock and display are behaving normally.

    A blank or frozen panel, or an oven stuck in a locked or Sabbath mode, is a control problem rather than a heating one - and sometimes just a setting.

Stop and call someone if

  • ! You smell gas at any point. Stop, ventilate the room and do not use the oven.
  • ! The igniter glows but the burner never lights.
  • ! The element is visibly broken, blistered or arcing.
  • ! The oven heats but the temperature is far off, which usually means the sensor or calibration rather than the element.

How to Check the Problem

✓ Check whether the bake element glows red in an electric oven during heating.
✓ If a gas oven takes a long time to start heating, the igniter may be weakening.
✓ Make sure the oven is receiving proper electrical power.
✓ If the oven repeatedly fails to reach the set temperature, the sensor or control board may need inspection.

Related Appliance Problems

  • oven not heating up
  • electric oven not heating
  • gas oven not heating
  • oven takes too long to preheat
  • oven not reaching temperature

Tried all that and it still will not work?

That is usually the point where the fault is a part rather than a setting. The diagnostic visit is $99 and you get the repair price before any work starts - so you can decide with the number in front of you.

Read about oven repair or see the areas we cover .

Do We Service Your Brand?

Type the brand of your appliance to check, or browse the list below.

  • Samsung
  • LG
  • Whirlpool
  • Maytag
  • GE
  • GE Profile
  • Café
  • Hotpoint
  • Kenmore
  • KitchenAid
  • Bosch
  • Thermador
  • Frigidaire
  • Electrolux
  • Amana
  • JennAir
  • Miele
  • Viking
  • Sub-Zero
  • Wolf
  • Fisher & Paykel
  • Speed Queen
  • Dacor
  • Bertazzoni
  • THOR Kitchen
  • Blomberg
  • Asko
  • Haier
  • Hisense

Not on the list? We repair most major appliance brands in Franklin and Nashville. Call us and we'll confirm before you book.

Frequently Asked Questions

Why is my oven not heating up?

The most common causes include a failed bake element in electric ovens or a worn igniter in gas ovens. Temperature sensor or control board problems can also prevent the oven from heating properly.

Why does my oven take so long to preheat?

A weak heating element or failing igniter may still work but cannot generate enough heat quickly. This often causes very slow preheating.

Why does my gas oven heat sometimes and not others?

A worn igniter is the usual cause. It still lights the gas on some attempts and falls short on others, and because the oven relights its burner again and again to hold temperature, it often quits partway through cooking rather than at the start. Replacing the igniter with a part made for that oven fixes it - we did exactly that on an Electrolux gas oven in Bellevue.

Can a faulty temperature sensor prevent an oven from heating?

Yes. If the sensor sends incorrect temperature readings to the control board, the oven may not activate the heating system correctly.

Is it safe to use an oven that is not heating properly?

The oven may still operate but cooking performance will be poor. A heating problem usually indicates a component failure that should be inspected and repaired.

Need Professional Oven Repair?

Quick Repair Co provides fast in-home appliance repair across Franklin and surrounding Middle Tennessee communities.

Call Book Now